Floor Sanding: Tips And Techniques To Achieve A Professional Finish
In this guide, we’ll cover some safety tips and techniques for Floor Sanding Geelong. We’ll also go over the supplies you’ll need to get the job done and show you how to prepare your home before you start sanding. By the end of this article, you won’t have any excuses for not having perfectly smooth floors!
Plan your project
The first step in any flooring project is to plan out how you will approach the job. This includes determining how much time you have available and what tools and materials are needed. It’s also important to consider safety issues, such as whether there are any risks involved with working on ladders or other high surfaces, or if anyone may be harmed by the dust created by sanding floors (if so, then take steps such as wearing a mask).
Finally, make sure that all materials can be disposed of according to local regulations–some products contain harmful chemicals that must be disposed of carefully!
Dust-proof your home
Dust-proofing your home is a crucial step in any floor sanding project. You want to keep kids, pets and other distractions out of the room until you’re done with all the sanding work.
Make sure doors are closed (and locked!) at all times while working on this project; if possible, cover furniture with plastic sheeting and put drop clothes over carpeting so that sanded dust doesn’t get tracked around or left behind on floors.
Once everything is covered up and secured in place, use a wet/dry vacuum to remove dust as you go along during each step of your sanding process.
Tape up any baseboards or crown molding
- Tape up any baseboards or crown molding. Any trim that’s close to the floor will be sanded down, so it’s important to protect it with painters tape. Make sure that your tape is secure and will not come off during the sanding process!
- Use a sharp utility knife to cut through the painter’s tape when you’re finished with this step (and before moving on).
-
Protect any surfaces you don’t want sanded
It’s important to protect areas that you don’t want to get sanded, so make sure you cover everything with plastic or something similar. This will keep dust from getting on them and make cleanup easier later on.
You’ll want to cover furniture with plastic or sheets, windows with plastic and doors with cardboard if you have an open door in your room (or else just leave them closed). If possible, also cover floors with sheets of plywood or other materials that can easily be removed after sanding is complete.
Gather your tools and materials
- Make sure you have all the tools and materials you need to complete your project. If you don’t, it might be time to revisit: Do a quick inventory of your garage or basement, because there’s no way around this step!
- Don’t forget to wear protective clothing: coveralls are great for keeping dust off of clothes; gloves protect hands from splinters and scratches; goggles protect eyes from flying debris; earplugs help keep out noise (if needed).
We hope you found this article helpful, and we wish you good luck with your Floor Sanding Geelong project. Make sure you select the right company. Total Floor Service is your one-stop shop for all your flooring needs and we have the right experts who can handle all kinds of flooring problems with the use of the latest technology.