From Dull to Dazzling: Transforming Your Concrete Floors with Polishing

If you’ve ever walked on a concrete floor that’s been polished, you know how incredibly smooth it feels.

When you choose Concrete Polishing in Melbourne, it is the process of using an abrasive pad and water to remove surface imperfections from concrete surfaces. The result is a mirror-like finish that makes even dull, grey-coloured concrete look new again.

Get Started with Concrete Polishing

Concrete polishing Melbourne is the process of transforming dull and worn concrete into a high-gloss, beautiful surface. It can be used on many different types of concrete floors including:

• Driveways
• Sidewalks
• Patios and porches

The first step to successful polishing is preparing your floor for the process. This includes cleaning away any dirt or debris from your concrete surface so that it’s ready for sealing and waxing. If there are cracks in your floor, fill them with epoxy putty before beginning work on other areas!

Once you have cleaned up all visible problems with your concrete, sand down any rough edges or spots using a power sander (or even an electric toothbrush).

Types of Concrete Polishing Products

There are several different types of concrete polishing products available, each with its advantages and disadvantages. Some are liquids, others powder and sprays. The majority of them come in different grits–the coarseness of the abrasive used in the product determines how smooth and shiny your floor will be after you’ve polished it.

The most common type is a liquid polishing compound that’s sprayed onto your floor before being worked into the surface with a buffer machine or by hand using special pads attached to a pole (like an orbital sander).

This method works well if you want an even finish over large areas but don’t have access to power tools like buffers or grinders; however, since it requires applying several coats each time you use this method, it takes longer than other methods do per square foot which can get expensive if you’re doing large jobs!

Steps to Concrete Polishing

• Remove any loose material. If there are small pieces of concrete on your floor, they can be easily removed with an electric sander or by hand-scraping with a trowel. If these bits don’t come off easily, they may be embedded in the surface and will need to be cleaned out before you polish them.
• Clean the floor with a degreaser such as Simple Green or TSP (trisodium phosphate). This step helps remove oil, grease, dirt and other contaminants from your concrete before applying sealant or polish so that these materials won’t cloud up when applied later on.
• Apply compound to dry concrete surfaces using an application machine designed specifically for this purpose; these machines come equipped with pads made from felt material that help distribute compound evenly over large areas without leaving streaks behind–a must if you want an even shine!
• The operator applies pressure against each pad until all excess compound has been removed from its surface; then he uses another pad soaked in water (not necessarily clean) to remove any remaining residue left behind after polishing is complete. This ensures maximum protection against staining caused by humidity levels rising above normal ranges.

Conclusion

To sum up, we would say that concrete polishing Melbourne is a smart investment and a great way to bring floors back to life. At Total Floor Service, our experienced personnel use the right tools and products. We work with the motto that your floor will look amazing after polishing. So, visit our home page, consult our experts, and hand over your concrete floor to us.