Vinyl flooring is a great choice for many homeowners, especially those who want an easy-to-clean surface that looks like tile.
But if your vinyl flooring is starting to show some wear and tear, it might be time to Strip And Seal Melbourne. Before you do so, there are several signs that you can look out for :
Worn out patches
One of the most common signs that you need to Strip And Seal Melbourne your vinyl flooring is worn out patches. Specifically, if there are worn out patches on your flooring from dirt or grime build up in the pores of the vinyl, this is an indication that it’s time for a deep cleaning.
If you have a high traffic area with lots of use, it can be difficult to keep up with regular maintenance like stripping and sealing vinyl floors.
A matte finish
A matte finish is a sign that your flooring has been worn down and needs to be stripped and sealed.
A matte finish is often caused by dirty, dusty air that has accumulated on your floors over time. To restore your floors to their original luster, contact a professional cleaning service.
Dent, scrape, and chip
If you’ve got a dent, scrape or chip in your vinyl flooring, there’s no need to panic. You can easily repair these with a little elbow grease and the right tools.
First things first: remove any debris from the affected area with an eraser or tack cloth. Then grab some rubbing alcohol, a cotton swab and some acetone-free nail polish remover (or other product made specifically for use on vinyl).
The next steps differ based on whether you’re repairing a dent or scratch/chip—but both follow similar principles.
It doesn’t look shiny anymore
Your floor may be dull and lifeless if it’s not shiny any more. When vinyl flooring is brand new, it will look shiny and glossy. As you walk on your vinyl floors over time, they will begin to dull down and become less reflective.
This can be because of wear and tear as well as dirt buildup or other things that may happen to the surface of the floor. It’s important to know that this isn’t necessarily a bad thing! If you want your floors to stay shiny forever then you’ll need to reseal them every year or so (depending on how much traffic they get).
However, if you’re happy with how they look at their current stage of life then there’s no reason why you should try to restore them back into their former glory by stripping off all of your existing finish!
It seems filthy
If your floors look dingy or have a dirty, yellow cast to them, it may be time to Strip And Seal Melbourne. Vinyl flooring can start out looking clean and shiny, but over time the dirt builds up due to the porous nature of vinyl.
This buildup can cause discoloration as well as making your floors feel gritty underfoot. The good news is that cleaning vinyl flooring is easy!
The only thing you’ll need is some dishwashing detergent or soap scum remover diluted with water—enough to make suds in a bucket (1/4 cup of detergent per gallon). Use an old toothbrush for scrubbing out grout lines between tiles if needed; otherwise just use a mop or large sponge on your entire surface area.
After mopping the solution onto your flooring surfaces, let them sit for 15 minutes before rinsing off with clean water using a wet vacuum or pressure washer (depending on how dirty they were).
Once you’ve determined that your vinyl flooring needs stripping and sealing, there are two options for how to go about it. You can hire a professional to do it for you with the help of a good reference.