Floor Sanding Geelong

Floor Sanding in Kitchens – How to Prepare floor sanding service

A floor sanding service is an excellent way to bring back the original look of your kitchen. 

Whether you want a complete makeover or just want to touch up areas that have become damaged over time, Floor Sanding Geelong service is a quick and easy process for achieving results that will last for years. Here are some tips on preparing your home for this type of project:

Plan ahead

Planning ahead is the key to any successful project. This rings especially true when it comes to floor sanding services in Kitchens, because it can be hard to plan for something you’ve never done before. 

You may not know what you need or how much it will cost, but if you’re smart about it, planning now will save both time and money later on.

Planning out what tools or materials are needed will help prevent mistakes or unnecessary purchases during the actual sanding process itself. 

Remove all furniture and appliances

It’s important to remove all furniture and appliances from the kitchen. If you have a dishwasher, remove it and place it in a safe place. If you have a fridge, remove it and place it in a safe place as well.

Protect the baseboards and joints of your walls

Protect the baseboards and joints of your walls.

Use masking tape to protect the baseboards, and painter’s tape to protect the floor.

Use a drop cloth over the entire floor area so that you do not damage it during sanding.

Do some pre-cleaning before every step

Before every Floor Sanding Geelong service step, you should do some pre-cleaning. Use a vacuum cleaner to remove dust and debris from the floor, then clean it with a damp, clean cloth or mop. 

Floor Sanding Geelong

The next step is to use mild detergent and water mixture on your mop to clean the floor. Then dry it off with another dry cloth or mop

Have a look around the kitchen

The first thing you need to do is have a look around the kitchen. Look for any electrical sockets, pipes or cables that may be hidden behind cupboards and units. 

If there are any, make sure they’re covered with plastic or tape before sanding commences so they don’t get damaged in any way by the sandpaper.

Next, clean up all of your tools and equipment so that they’re ready for work when it comes time for them to be used again after finishing off one section of flooring at a time (this will help ensure accuracy). 

You’ll also want to protect yourself during this process by wearing goggles or safety glasses when using power tools such as electric sander machines; these will protect against debris flying into your eyes should anything go wrong during operation which could otherwise cause serious injury!


It’s important to have a plan for your kitchen floor sanding. You don’t want to be caught off guard by any unexpected obstacles that may come up during the process, so make sure you do some research before starting this project. 

Total Floor Service is a Floor Sanding Geelong specialist. We take great care when sanding and coating around kitchen cabinets. We usually sand to within 5 mm of the kick-boards. The job is then finished with specific hand-held scrapers.