Beginner’s Guide to Floor Sanding and Polishing

If you are familiar with wood sanding, you can get the concrete Floor Polishing Geelong concept. I do not recommend doing this as well as a  Floor Sanding Melbourne. You need a robust to polish machine. This machine has an impregnation disc of gradual thin diamonds, which are used to slowly grind the surface as you want. You can get the brightness and smoothness you want. If you do not want to invest in your machine, there are more than happy contractors to help you get the effect you want. 

There are several other options that you want to consider when you are working with your concrete floor, but this is one of the most popular. You may have seen this with the local supermarket, the floor of the showroom, or something similar. When you invest in a Floor Polishing Geelong, you can have a big difference in the room.  

What is the process? 

  •  Sanding requires first drilling all nails below the floor surface. This is to ensure that the sanding process is not hampered. Starting with coarse sandpaper, the floor sander will be used to sand existing floor finishes, coatings, stains, and varnishes. Continuing with the use of intermediate sandpaper to further sand the previous coat, a special tool called a floor edge sander will be used for hard-to-reach edges that cannot be reached with the main floor sander.

Floor Sanding Melbourne

  •  After this initial sanding process, the holes will be filled with floor putty to ensure that the surface is smooth and non-porous. 

Finally, use high-quality sandpaper to finely buff the wood surface and buff off excess floor filler. If you are applying new stains to your hardwood floors, this is the time to apply them! 

  •  After finishing the polishing, the next step is polishing. Use a primer that can seal the wood, and let your hardwood floors dry overnight for best results. This seals the openness of your hardwood floor and gives you time to create the proper barrier, which will help the life of the finish you choose. It is worth noting that this primer may need to be sanded with ultra-fine sandpaper to even out the wood grain before applying a new coating. If you use a solvent-based solution, each layer of coating will take about one or two days to dry, while water-based polyurethane will dry quickly within 8 hours, and you should apply at least 34 layers. 

Generally speaking, if your hardwood flooring is installed correctly and well finished, and if you can meet the minimum Floor Polishing Geelong. Not only is it adaptable enough to match your evolving design needs over time, but when you absolutely need a fresh appearance but still want a beautiful hardwood floor, Floor Sanding Melbourne and polishing the floor will give you the look you desire without having to redo the flooring. Total Floor Service in Melbourne is a professional steam cleaning company that specializes in carpets and other hard surfaces. We are Melbourne’s leading floor cleaning company, providing a wide range of floor cleaning services.